The Nintendo Switch's USP is its ability to be carried around with you. But if your console isn't charging, its big selling point immediately loses value.
There can be many reasons why your Nintendo Switch is not charging. If your AC adapter is broken, for example, it will immediately affect the console's ability to remain topped up for use on the go. Clean the charging port with compressed air, perform a hard reset by holding the power button for 12 seconds, or try charging through the dock or another USB-C cable. If nothing works, Nintendo Switch repair services are the solution!
How to Fix a Nintendo Switch That Won’t Charge
If your Nintendo Switch isn’t charging, don’t panic. There are several ways to fix the issue.
Check the Charger
Provided you're using the official USB-C charger that came with your Switch, you can reboot the charger by unplugging it from its outlet and from the Nintendo Switch for roughly 30 seconds. Plug it back into the outlet and Switch, and test to see if it charges.
If that doesn't work, you can try plugging the AC adapter into another outlet or using a different one.
Reset your Switch
If the charging indicator does not show up when you connect your adapter directly to your Switch, attempt a hard reset. Press and hold down the power button on your Switch for 12 seconds until it powers off fully. Wait for a couple of seconds, then switch it back on and reconnect the AC adapter.
Clean the Charging Port
Dust and debris may accumulate within the USB-C port, preventing it from charging properly. Clean the port with a can of compressed air or a soft brush, being careful not to harm the internal pins.
Try Handheld Mode Charging
If your Switch won't charge in the dock, plug in the AC adapter to the console itself. If it will charge with it plugged in this way, the issue may be the dock, not the Switch.
System Update Check
Sometimes, software glitches can hinder charging. Ensure your Switch is on the current system update by accessing System Settings > System > System Update and installing any available updates.
Charge in a Different Temperature Environment
Hot temperatures can affect charging performance. If your Switch is either very hot or very cold, bring it to a room-temperature environment, let it sit for a few minutes, and try charging again.
Take Off Any Accessories
If you’re using third-party accessories like a case, grip, or controller attachment, they could be interfering with the charging port. Remove any accessories and try charging the Switch without them.
Replace the Battery
If your Switch still doesn’t charge after trying different chargers, the battery may be damaged or worn out. Replacing the battery will restore charging to normal.
Use a High-Quality Third-Party Charger
If an original Nintendo charger is not accessible, use a good-quality third-party USB-C charger with the capacity to support the Switch's power requirements (15V/2.6A). Avoid using cheaper knockoffs, as they may not provide sufficient power.
Replace or Repair the Charging Port
If cleaning the port does not work, the USB-C port may be damaged. A Nintendo Switch repair technician can replace the port, and charging will return to normal.
Reasons Why Your Nintendo Switch Won’t Charge
Here are some possible reasons why your Switch does not charge.
Faulty Charging Cable or Adapter: A broken or incompatible charger could prevent the Switch from fully charging. Check using a licensed Nintendo charger or by testing with a new cable and adapter.
Dirty or Damaged Charging Port: Dust, dirt, or bent pins within the charging port can cause blockage preventing proper connection. Clean the port gently with compressed air or a soft brush.
Overheated Console: When the Switch overheats, it can temporarily pause charging. Allow the console to cool down before trying to charge it again.
Battery Problems: The battery will eventually deteriorate, causing charging issues. If the Switch refuses to hold a charge, it could require a new battery.
Software Glitch: A system crash or bug may interrupt charging. Attempt a hard reset by holding down the power button for 12-15 seconds, then booting up the console.
Conclusion
A Nintendo Switch that doesn't charge can be annoying, but there are fixes. Checking the charge and outlet, cleaning the charging port, or doing a hard reset will often fix the problem. If these don't help, going to a professional repair shop for Nintendo Switch repairs is the best option to get your Switch working again.
Comments
0 comment