The Conical Screw Mixer is used for applications in which gentle mixing or blending in combination with residue-free material discharge is required. Furthermore, this type of mixer is suitable for intermediate material storage combined with temporary blending.
Conical Screw Mixer(Nauta Mixer) - VORTEX Mixing Technology
The CM Conical Mixer is a convective mixing machine with high mixing efficiency. The CM Conical Screw Mixer treats the product mixture gently and ensures a high level of mixing accuracy without any material distortion. The CM relies on a combined three-dimensional action produced by a screw hanging from a revolving arm inside the conical vessel, as well as by upward rotation of the screw.
 |
A、Mixing Homogeneity Vortex conical screw mixer (Nauta Mixer) equips two screws (one long screw, one short screw), three screw is also optional |
 |
B、Heat/Cool Jacket Heat or cool jacket is optional for vortex ribbon blender, the mixing materials could be heated or cooled by injet hear/cool media into the jacket. Heat media could be hot water, steam or thermal oil. Cool media could be cool water. |
 |
C、Liquid Sprayer Liquid could be sprayed into mixer at mixing. Through this device, liquid could mix well with powder materials and avoid agglomerates. |
 |
D、Pressure-resistant Cover The top lid could be pressure resistant, the cone cylinder could be thicken to bear more positive pressure or negative pressure. |
 |
E、Feed Way Vortex conical screw mixer could be fed by hand, vacuum conveyor or screw conveyor. The cylinder could be negative pressure to suck materials into it. |
 |
F、Discharge Way Vortex standard conical screw mixer use dislocation vale, this kind of valve cause few dead zone during mixing. Bufferfly, ball, rotary valve and side discharge is also available. |
Vertical Ribbon Mixer
V Type Mixer
Twin Shaft Paddle Mixer
Ribbon Blender Mixer
Comments
0 comment